بحث بيانات أعضاء هيئة التدريس

التدرج الوظيفى الأكاديمى

معيد : 20/12/1998
مدرس مساعد : 23/6/2005
مدرس : 28/9/2009
أستاذ مساعد : 30/12/2014
أستاذ : 28/1/2020

الأبحاث العلمية

1 - Effect of some manufacturing parameters on mechanical properties of extruded Al-alumina composites

2 - Fabrication of copper–alumina nanocomposites by mechanochemical routes

3 - preparation and properties of Al2O3 nanoparticle reinforced copper matrix composite by in situ processing

4 - Fabrication of copper-alumina nanocomposite by mechano-chemical routes

5 - Properties of Copper-Alumina Nano-Composite Produced by mechano-chemical routes

6 - Fabrication and Properties of copper-alumina nanocomposite by mechano-chemical routes

7 - Fabrication of copper-alumina nanocomposite by mechano-chemical routes

8 - Compressive and wear resistance of nanometric alumina reinforced copper matrix composites (1432).

9 - Prediction of abrasive wear rate of in situ Cu–Al2O3 nanocomposite using artificial neural networks (1433).

10 - Electrical and Mechanical Performance of Zirconia-Nickel Functionally Graded Materials (1434).

11 - Effect of SomeManfacturing Parameters onMachining of Extruded Al-Al2O3 Composites (1433).

12 - Thermal expansion and thermal conductivity characteristics of Cu–Al2O3 nanocomposites (1433).

13 - Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites (1434).

14 - Effect of Mechanical Milling on the Morphologyand Structural Evaluation ofAl- Al2O3 Nanocomposite Powders (1435).

15 - Effect of matrix/reinforcement particle size ratio (PSR) on the mechanical properties of extruded Al–SiC composites (1435).

16 - The effect of Mg add on morphology and mechanical properties of Al–xMg/10Al2O3 nanocomposite produced by mechanical alloying (1435).

17 - Effect of Iron Addition on the Microstructure, Mechanical and Magnetic Properties of Al-Matrix Composite Produced by Powder Metallurgy Route (1435).

18 - Microstructure evolution and mechanical properties of Al/Al–12%Si multilayer processed by accumulative roll bonding (ARB) (1436).

19 - Experimental investigation and FE simulation of nano-indentation on Al–Al2O3 nanocomposites (1437).

20 - Experimental investigation on the compressibility of Al/Al2O3 nanocomposites (1437).

21 - Experimental investigation and FE simulation of spherical indentation on nano-alumina reinforced copper-matrix composite produced by three different techniques (1438).

22 - Microstructure, mechanical and wear properties of Cu–ZrO2 nanocomposites (1438).

23 - Synthesis and characterization of CueZrO2 nanocomposite produced by thermochemical process (1438).

24 - The effects of nano-silica/nano-alumina on fatigue behavior of glass fiber-reinforced epoxy composites (1438).

25 - Investigation on microstructure and properties of Cu-ZrO2 nanocomposites synthesized by in situ processing (1439).

26 - Production and properties of Cu-ZrO2 nanocomposites (1439).

27 - Experimental investigation on strengthening mechanisms in Al-SiC nanocomposites and 3D FE simulation of Vickers indentation (1439).

28 - Improving compressibility and thermal properties of Al–Al2O3 nanocomposites using Mg particles (1439).

29 - Optimum milling parameters for production of highly uniform metalmatrix nanocomposites with improved mechanical properties (1439).

30 - Improved mechanical and wear properties of hybrid Al-Al2O3/GNPs electroless coated Ni nanocomposite (1440).

31 - Experimental and numerical investigation on strengthening mechanisms of nanostructured Al-SiC composites (1440).

32 - Improving compressibility and thermal properties of Al–Al2O3 nanocomposites using Mg particles (1439).

33 - Experimental study on tribological properties of Cu–Al2O3 nanocomposite hybridized by graphene nanoplatelets (1441).

34 - Effect of tool pin side area ratio on temperature distribution in friction stir welding (1441).

35 - Effect of Al2O3 nanoparticles content and compaction temperature on properties of Al–Al2O3 coated Cu nanocomposites (1441).

36 - Effect of GNPs coated Ag on microstructure and mechanical properties of Cu-Fe dual-matrix nanocomposite (1440).

37 - Effect of high energy ball milling on strengthening of Cu-ZrO2 nanocomposites (1440).

38 - Experimental and numerical investigation on strengthening mechanisms of nanostructured Al-SiC composites (1440).

39 - Effect of ZrO2 content on properties of Cu-ZrO2 nanocomposites synthesized by optimized high energy ball milling (1440).

40 - Effect of GNPs content on thermal and mechanical properties of a novel hybrid Cu-Al2O3/GNPs coated Ag nanocomposite (1440).

41 - Experimental study on properties of Al-Al2O3 nanocomposite hybridized by graphene nanosheets (1442).

42 - Effect of nano Al2O3 coated Ag addition on the corrosion resistance and electrochemical behavior of Cu-Al2O3 nanocomposites (1441).

43 - Effect of Al2O3 addition on hardness and wear behavior of Cu–Al2O3 electro-less coated Ag nanocomposite (1441).

44 - Effects of ZrO2 nanoparticle content on microstructure and wear behavior of titanium matrix composite (1441).

45 - Enhanced strength and ductility of Al-SiC nanocomposites synthesized by accumulative roll bonding (1441).

46 - Experimental investigation on the mechanical, structural and thermal properties of Cu–ZrO2 nanocomposites hybridized by graphene nanoplatelets (1441).

47 - Effect of Al2O3 particles on mechanical and tribological properties of Al–Mg dual-matrix nanocomposites (1441).

48 - Structural, mechanical and tribological properties of Cu–ZrO2/GNPs hybrid nanocomposites (1441).

49 - Correlation between grain boundary evolution and mechanical properties of ultrafine-grained metals (1441).

50 - Improved strength and ductility of friction stir tailor-welded blanks of base metal AA2024 reinforced with interlayer strip of AA7075 (1441).

51 - Fabrication and evaluation of tribological properties of Al2O3 coated Ag reinforced copper matrix nanocomposite by mechanical alloying (1442).

52 - Effect of through-the-thickness position of aluminum wire mesh on the mechanical properties of GFRP/Al hybrid composites (1443).

53 - Mechanical Performance of glass/epoxy composites enhanced by micro- and nanosized aluminum particles (1442).

54 - Prediction of Tribological Properties of Alumina-Coated, Silver-Reinforced Copper Nanocomposites Using Long Short-Term Model Combined with Golden Jackal Optimization (1444).

55 - Utilization of Improved Machine Learning Method Based on Artificial Hummingbird Algorithm to Predict the Tribological Behavior of Cu-Al2O3 Nanocomposites Synthesized by In Situ Method (1443).

56 - On the microstructural and mechanical responses of dual-matrix Al-Ni/SiC composites manufactured using accumulative roll bonding (1444).

57 - Optimization of the accumulative roll bonding process parameters and SiC content for optimum enhancement in mechanical properties of Al-Ni-SiC composites (1444).

58 - Predicting crystallite size of Mg-Ti-SiC nanocomposites using an adaptive neuro-fuzzy inference system model modified by termite life cycle optimizer (1444).

59 - Prediction of the tensile properties of ultrafine grained Al–SiC nanocomposites using machine learning (1444).

60 - The effect of Cu coated Al2O3 particle content and densification methods on the microstructure and mechanical properties of Al matrix composites (1444).

61 - On the prediction of the mechanical properties of ultrafine grain Al-TiO2 nanocomposites using a modified long-short term memory model with beluga whale optimizer (1444).

62 - Numerical modeling of magneto hydrodynamic buoyancy-driven convection for enhanced energy applications (1444).

63 - Utilizing a unified conceptual dynamic model for prediction of particle size of duel-matrix nanocomposites during mechanical alloying (1444).

64 - An enhanced Dendritic Neural Algorithm to predict the wear behavior of alumina coated silver reinforced copper nanocomposites (1444).

65 - Prediction of wear rates of Al-TiO2 nanocomposites using artificial neural network modified with particle swarm optimization algorithm (1444).

66 - A modified artificial neural network to predict the tribological properties of Al-SiC nanocomposites fabricated by accumulative roll bonding process (1444).

67 - On the understanding and prediction of tribological properties of Al-TiO2 nanocomposites using artificial neural network (1444).

68 - Optimized ball milling and sequential addition of SiC and MWCNTs reinforcements for enhanced performance of copper hybrid composites (1446).

69 - A novel strategy for activation technique for 6H-SiC substrates in electroless Ni-P plating processes (1446).

70 - Enhanced random vector functional link based on artificial protozoa optimizer to predict wear characteristics of Cu-ZrO2 nanocomposites (1446).

71 - Microstructure, mechanical properties and wear behavior of Mg matrix composites reinforced with Ti and nano SiC particles (1445).

72 - Investigating the valence balance of adding Nano SiC and MWCNTs on the improvement properties of copper composite using mechanical alloying and SPS techniques (1445).

73 - Navigating cardiovascular dynamics through mathematical modeling of arterial blood flow (1445).

74 - Comprehensive investigation of the impact of milling time on microstructural evolution and tribological properties in Mg-Ti-SiC hybrid composites (1445).

75 - Design and high efficient construction of bilayer NiCoO2/Poly(1-NA-co-oT) nanocomposite absorber for X-band stealth applications (1445).

76 - Recent Advances and Applications of Carbon Nanotubes (CNTs) in Machining Processes: A Review (1446).

77 - Effect of carbon content on the martensite morphology, texture, and mechanical properties of dual-phase steels (1447).

78 - Optimizing TiO2 content for balanced mechanical and corrosion properties in Cu-1 %CNT nanocomposites (1447).

79 - Machine learning-enabled discrete transfer function modeling and optimization of mechanical properties in ARB-fabricated Al/Ni/SiC nanocomposites (1447).

80 - Microstructure and wear behavior of aluminum matrix composites reinforced with copper-coated cubic boron nitride nanoparticles (1447).

81 - Microstructural evolution and strengthening mechanisms in Cu-coated cBN reinforced aluminum nanocomposites (1447).

82 - Influence of initial surface roughness on the deposition and adhesion of electroless Ni-P plating on 6H-SiC substrate (1446).

83 - Hybrid PLA-based biocomposites produced by DLP 3D printer with alumina and silica nanoparticles (1446).

84 - How do Printing Parameters Influence the Tensile Performance of 3D-Printed Lightweight Structures: A Comprehensive Analysis and Optimization Approach? (1446).

المجالات البحثية

fghgfhh

عادل فتحى مصلحى ابراهيم