بحث بيانات أعضاء هيئة التدريس

الموقع الشخصى

عبدالعزيز ابراهيم سلمى

الكلية الهندسة - القسم التصميم الميكانيكى والانتاج

مدرس : 1/1/1900
أستاذ مساعد : 12/2/1986
أستاذ : 29/5/1992

1 - An Investigation into SMAW Process Assisted by FEM (1427).

2 - flexural fatigue characteristics of two different types of glass fiber/epoxy polymeric composite laminates with statistical analysis (1434).

3 - experimental study on flexural fatigue behavior of glass fibers/epoxy hybrid composites with statistical analysis (1434).

4 - In-Plane Shear properties Of Unidirectional Glass Fiber (U)/ Random Glass Fiber (R)/Epoxy Hybrid And Non-Hybrid Composite Laminates (1432).

5 - manufacturing and mechanical behavior of the graphite nanoplatelets/ Al Matrix composites (1432).

6 - fabrication and characterization of aluminum - graphite composites (1432).

7 - Monotonic properties of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid composites (1431).

8 - machinability analysis in drilling woven GFR/Epoxy composites: part -II- effect of drill wear (1431).

9 - machinability analysis in drilling woven GFR/Epoxy composites: part I-effect of machining parameters (1430).

10 - welding of aluminum metal matrix composites (All/Sic-MMcs (1430).

11 - tensile and shear properties of cross-ply composite laminates with different off-axis angles (1429).

12 - Interlaminar shear behavior of cross-ply GFRP composite with different off-axis angles (1429).

13 - prediction of surface roughness profiles for milled surfaces using an artificial neural network and fractal geometry approach (1429).

14 - Behavior of notched and unnotched [0o/+30o/+60o/90o]s GFR/Epoxy composites under static and fatigue loads (1427).

15 - Dynamic viscoelastic behavior of GFR/vinylester and GFR/epoxy composites (1425).

16 - Effect of mean stress on fatigue behavior of GFRP pultruded composites (1416).

17 - Effect of fibre volume fraction on the fatigue behavior of GRP pultruded rod composites (1416).

18 - Mechanical and wear properties of random GFRP composites (1414).

19 - Experimental study on the mechanical behavior of plain fabric composite materials (1414).

20 - Tensile fracture of woven fabric composite materials (1414).

21 - Parametic studies in helicopter design (1413).

22 - On the dynamical behavior of an uniform cantilever beam of variable length (1412).

23 - Some factors influencing the power, surface roughness and wheel wear in face milling (1412).

24 - Tensile, compressive and flexural properties of pultruded FRP composite rod (1412).

25 - Some factors affecting the cutting power and surface roughness in symmetrical face milling (1411).

26 - On the wear behavior of some grades of ductile irons (1410).

27 - On the mechanical wear behavior of copper-base alloys (1410).

28 - Some factors affecting the accuracy of turned parts (1410).

29 - Application of the direct automated method on non-hertzian contact problems (1410).

30 - On the mechanical wear behavior of some aluminum alloys (1409).

31 - The effect of cutting variables on the power and cutting force in shaping (1409).

32 - Effect of tool rigidity and workpiece mounting on the overall vibration level and product accuracy in turning processes (1409).

33 - Influence of cooling rate and magnesium content on machinability of ductile iron (1409).

34 - The effect of cutting variables on the surface roughness and cutting temperature in turning (1409).

35 - Computer aided force analysis and cross section for a large space truss members (1409).

36 - An investigation into the effect of cutting variables on the cutting force and power in turning process (1408).

37 - Theoretical and experimental structural analysis of an aircraft delta wing (1407).

38 - An investigation of a helicopter tailcone normal modes of vibration (1407).

39 - Fatigue substantiation of titanium lugs (1405).

40 - An investigation of helicopter fuselage normal modes of vibration (1405).

41 - An investigation into the billet deformation boundaries in hydrostatic extrusion (1405).

42 - Computer aided to the bending analysis of a cantilever plate using all free element (1403).

43 - The application of computer aided design in the analysis of skeletal structures (1402).

44 - Machinability Analysis in Drilling Woven GFR/Epoxy Composites Part 1: Effect of Machine Parameters (1431).

45 - Expermintal and numerical analysis of pinned-joints composite laminates: Effects of stacking sequence (1433).

46 - Drilling Analysis of Woven Glass Fiber Reinforced/Epoxy Composites (1434).

47 - Flexural Fatigue Performance of Glass Fiber/Epoxy Step-Wise Functionally and Non-Functionally Graded Composites of Different Structures (1438).

48 - Comparison between bearing strengths of molded‑in and machined holes of GFR/PP composites. (1444).

49 - Study of bearing strength for injection molded GFRPP composites under dry and wet conditions (1444).

50 - The Influence of Glass Fiber and Copper Wire z-Binder on the Mechanical Properties of 3D Woven Polymeric Composites (1445).

51 - Performance analysis of 3D orthogonal polymeric composites reinforced with metallic and glass fibrous z-binders of varying sizes (1446).

المجالات البحثية