بحث بيانات أعضاء هيئة التدريس - جامعة الزقازيق

/ بحث بيانات أعضاء هيئة التدريس - جامعة الزقازيق

محمد ابراهيم محمد عبدالعال

الموقع الشخصى
السيرة الذاتية

محمد ابراهيم محمد عبدالعال

الكلية الهندسة - القسم التصميم الميكانيكى والانتاج
التصميم الميكانيكي والانتاج

الدرجات العلمية

دكتوراه فى التصميم الميكانيكي والانتاج, -جامعة الزقازيق [2010]

الحالة الوظيفية الحالية :

معار

التدرج الوظيفى الأكاديمى

معيد : 3/10/2000
مدرس مساعد : 22/10/2005
مدرس : 21/12/2010
أستاذ مساعد : 28/3/2016
أستاذ : 29/6/2021

الأبحاث العلمية

1 - EDM AND CONVENTIONAL MACHINING OF PARTICULATE Al-SiC METAL MATRIX COMPOSIT (1425).

2 - EFFECT OF KEROSENE AND PARAFFIN OIL AS DIELECTRICS ON THEELECTRIC DISCHARGE MACHINING CHARACTERISTICS OF AL/SIC METAL MATRIX COMPOSITE (1427).

3 - Effect of Cu content and number of passes on evolution of microstructure and mechanical properties of ECAPed Al/Cu alloys (1430).

4 - 3D FEM simulations for the homogeneity of plastic deformation in Al–Cu alloys during ECAP (1430).

5 - Wear properties of ECAP-processed ultrafine grained Al–Cu alloys (1431).

6 - Deformation Characteristics Evaluation of Modified Equal Channel Angular Pressing Processes (1430).

7 - Plastic Flow and Strain Homogeneity of an Equal Channel Angular Pressing Process Enhanced through Forward Extrusion (1431).

8 - Tensile Properties and Fracture Characteristics of ECAP-Processed Al and Al-Cu Alloys (1431).

9 - Influence of the pre-homogenization treatment on the microstructure evolution and the mechanical properties of Al–Cu alloys processed by ECAP (1432).

10 - Effect of high-pressure torsion processing on the microstructure evolution and mechanical properties of consolidated micro size Cu and Cu-SiC powders (1438).

11 - 3D FEM simulations and experimental validation of plastic deformation of pure aluminum deformed by ECAP and combination of ECAP and direct extrusion (1439).

12 - Mechanical and biological behavior of ultrafine-grained Ti alloy aneurysm clip processed using high-pressure torsion. (1438).

13 - Effect of Equal Channel Angular Pressing on the Surface Roughness of Solid State Recycled Aluminum Alloy 6061 Chips (1438).

14 - Physical and Mechanical Properties of Al-SiC Composites (1438).

15 - Wear Resistance of the La62Cu12Ni12Al14 Bulk Metallic Glass Under Dry Friction Conditions (1439).

16 - Effect of the fabrication method on the wear properties of copper silicon carbide composites (1440).

17 - Effect of the fabrication method on the wear properties of copper silicon carbide composites (1440).

18 - Wear and mechanical properties of Al chips and Al chips composites recycled by high-pressure torsion (1443).

المجالات البحثية