بحث بيانات أعضاء هيئة التدريس - جامعة الزقازيق

/ بحث بيانات أعضاء هيئة التدريس - جامعة الزقازيق

محمد على السيد محمد عجوة

الموقع الشخصى
السيرة الذاتية

محمد على السيد محمد عجوة

الكلية الهندسة - القسم التصميم الميكانيكى والانتاج
التصميم الميكانيكي والانتاج

قائم بعمل منسق برنامج الميكاتونيات

الدرجات العلمية

بكالوريوس فى التصميم الميكانيكي والانتاج, -جامعة الزقازيق [1997]
ماجستير فى التصميم الميكانيكي والانتاج, -جامعة الزقازيق [2004]
دكتوراه فى التصميم الميكانيكي والانتاج, -جامعة لشبونه [2011]

الحالة الوظيفية الحالية :

قائم بالعمل

التدرج الوظيفى الأكاديمى

معيد : 12/1/1998
مدرس مساعد : 3/1/2005
مدرس : 24/1/2012
أستاذ مساعد : 28/2/2017
أستاذ : 26/4/2022

الأبحاث العلمية

1 - Instability of frictional contact states in infinite layers (1428).

2 - Frictional instabilities in orthotropic hollow cylinders (1430).

3 - Surface Instabilities in Linear Orthotropic Half-Spaces With a Frictional Interface (1433).

4 - Refining SiCp in reinforced Al–SiC composites using equal-channel angular pressing (1435).

5 - Existence and uniqueness for frictional incremental and rate problems–sharp critical bounds (1437).

6 - Nanobeam sensor for measuring a zeptogram mass (1437).

7 - Using symbolic computation in the characterization of frictional instabilities involving orthotropic materials (1436).

8 - Experimental and analytical investigation of water diffusion process in nano-carbon/alumina/silica filled epoxy nanocomposites (1437).

9 - Vibration of a carbyne nanomechanical mass sensor with surface effect (1437).

10 - Analysis of Size-dependent Mechanical Properties of CNTs Mass Sensor Using Energy Equivalent Model (1437).

11 - Optimum processing parameters for equal channel angular pressing (1437).

12 - Enhancement of water barrier properties and tribological performance of hybrid glass fiber/epoxy composites with inclusions of carbon and silica nanoparticles (1439).

13 - Improvement of Hardness and Wear Resistance of Glass Fiber Reinforced Epoxy Composites by the Incorporation of Silica/Carbon Hybrid Nanofillers (1438).

14 - Enhancement of water barrier properties and tribological performance of hybrid glass fiber/epoxy composites with inclusions of carbon and silica nanoparticles (1438).

15 - Experimental and analytical investigation of water diffusion process in nano-carbon/alumina/silica filled epoxy nanocomposites (1437).

16 - Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model (1439).

17 - Mechanical properties of on/off-axis loading for hybrid glass fiber reinforced epoxy filled with silica and carbon black nanoparticles (1439).

18 - The influence of incorporation of silica and carbon nanoparticles on the mechanical properties of hybrid glass fiber reinforced epoxy (1440).

19 - Effective Damage Indicator for Aluminum Alloy (AA6082Zr) Processed by ECAE (1440).

20 - Modeling of Wear Behavior of Al–Si/Al2O3 Metal Matrix Composites (1441).

21 - New nonlinear regression modeling and multi-objective optimization of cutting parameters in drilling of GFRE composites to minimize delamination (1440).

22 - Critical elastic parameters motivating divergence instability of frictional composite infinitely long media (1440).

23 - Electrospinning process optimization for Nylon 6,6/Epoxy hybrid nanofibers by using Taguchi method (1440).

24 - Mechanical and Thermal Characteristics of Optimized Electrospun Nylon 6,6 Nanofibers by Using Taguchi Method (1441).

25 - New nonlinear regression modeling and multi-objective optimization of cutting parameters in drilling of GFRE composites to minimize delamination (1440).

26 - The influence of incorporation of silica and carbon nanoparticles on the mechanical properties of hybrid glass fiber reinforced epoxy (1440).

27 - Vibration analysis of material size-dependent CNTs using energy equivalent model (1439).

28 - Treated basalt fibers reinforced nylon 6, 6/epoxy hybrid nanofibril composites (1441).

29 - Effect of ultrasonic parameters on the mechanical properties of glass fiber reinforced polyester filled with nano-clay (1441).

30 - Integrated vacuum assisted resin infusion and resin transfer molding technique for manufacturing of nano-filled glass fiber reinforced epoxy composite (1441).

31 - Can ultrasonic parameters affect the impact and water barrier properties of nano-clay filled glass fiber/polyester composites? (1442).

32 - Hardness, wear behavior and processing time of diluent and non-diluent nanocomposite laminates manufactured by vacuum infusion technique (1442).

33 - Effect of ethanol on the mold filling-time and mechanical properties of woven glass fiber reinforced epoxy filled with TiO2 nanoparticles (1442).

34 - Existence and multiplicity of solutions in frictional contact mechanics. Part II: Analytical and numerical case study (1441).

35 - Existence and multiplicity of solutions in frictional contact mechanics. Part I: A simplified criterion (1441).

36 - Upgraded Mechanical Properties of Diluent Nano-filled Glass/Epoxy Composites Fabricated by Vacuum Assisted Resin Infusion (1442).

37 - Upgraded Mechanical Properties of Diluent Nano-filled Glass/Epoxy Composites Fabricated by Vacuum Assisted Resin Infusion (1443).

38 - Hardness, wear behavior and processing time of diluent and non-diluent nanocomposite laminates manufactured by vacuum infusion technique (1445).

39 - Effect of ethanol on the mold filling-time and mechanical properties of woven glass fiber reinforced epoxy filled with TiO2 nanoparticles (1443).

40 - Effect of ultrasonic parameters on the mechanical properties of glass fiber reinforced polyester filled with nano-clay (1443).

41 - Can ultrasonic parameters affect the impact and water barrier properties of nano-clay filled glass fiber/polyester composites? (1443).

42 - Computational damage analysis of metal matrix composites to identify optimum particle characteristics in indentation process (1445).

43 - Insights into particle dispersion and damage mechanisms in functionally graded metal matrix composites with random microstructure-based finite element model (1446).

المجالات البحثية