بحث بيانات أعضاء هيئة التدريس - جامعة الزقازيق

/ بحث بيانات أعضاء هيئة التدريس - جامعة الزقازيق

منى ابوالوفا مجاهد ابوالوفا البسيونى

الموقع الشخصى
السيرة الذاتية

منى ابوالوفا مجاهد ابوالوفا البسيونى

الكلية الهندسة - القسم التصميم الميكانيكى والانتاج
التصميم الميكانيكي والانتاج

الدرجات العلمية

بكالوريوس فى التصميم الميكانيكي والانتاج, -جامعة الزقازيق [1998]
ماجستير فى التصميم الميكانيكي والانتاج, -جامعة الزقازيق [2004]
( ماجستير هندسة التصميم الميكانيكي و الإنتاج)
دكتوراه فى التصميم الميكانيكي والانتاج, -جامعة الزقازيق [2012]

الحالة الوظيفية الحالية :

قائم بالعمل

التدرج الوظيفى الأكاديمى

معيد : 20/12/1998
مدرس مساعد : 31/10/2004
مدرس : 26/6/2012
أستاذ مساعد : 4/8/2018
أستاذ : 25/7/2023

الأبحاث العلمية

1 - Positron annihilation spectroscopy and mechanical properties studies for epoxy matrices reinforced with different nanoparticles (1437).

2 - Enhancement of water barrier properties and tribological performance of hybrid glass fiber/epoxy composites with inclusions of carbon and silica nanoparticles (1438).

3 - Experimental and analytical investigation of water diffusion process in nano-carbon/alumina/silica filled epoxy nanocomposites (1437).

4 - Tribological Characterization of Hybrid Metal Matrix Composites Processed by Powder Metallurgy (1438).

5 - Fabrication and characterization of functionally graded nanoclay/ glass fber/epoxy hybrid nanocomposite laminates (1438).

6 - Evaluation of Mechanical Properties of Jute/Glass/Carbon Fibers Reinforced Hybrid Composites (1439).

7 - Mechanical properties of on/off-axis loading for hybrid glass fiber reinforced epoxy filled with silica and carbon black nanoparticles (1439).

8 - The influence of incorporation of silica and carbon nanoparticles on the mechanical properties of hybrid glass fiber reinforced epoxy (1440).

9 - An experimental investigation on the effect of incorporation of different nanofillers on the mechanical characterization of fiber metal laminate (1440).

10 - Optimization of hybrid natural laminated composite beams for a minimum weight and cost design (1441).

11 - Improvement of Impact and Water Barrier Properties of GLARE by Incorporation of Different Types of Nanoparticles (1441).

12 - Mechanical Properties Evaluation of Sugarcane Bagasse-Glass/ Polyester Composites (1442).

13 - Synthesis Effect of Nano-fillers on the Damage Resistance of GLARE (1442).

14 - Development of Al–Mg–Si alloy performance by addition of grain refiner Al–5Ti–1B alloy (1443).

15 - The effect of incorporation of hybrid silica and cobalt ferrite nanofillers on the mechanical characteristics of glass fiber-reinforced polymeric composites (1443).

16 - Mechanical Performance of glass/epoxy composites enhanced by micro- and nanosized aluminum particles (1442).

17 - Study of Hybridization Effect of New Developed Rice Straw mat/ Glass Fiber Reinforced Polyester Composite (1442).

18 - Upgraded Mechanical Properties of Diluent Nano-filled Glass/Epoxy Composites Fabricated by Vacuum Assisted Resin Infusion (1443).

19 - Hardness, wear behavior and processing time of diluent and non-diluent nanocomposite laminates manufactured by vacuum infusion technique (1445).

20 - Using ANN and OA techniques to determine the specific wear rate effectors of A356 Al-Si/Al2O3 MMC (1443).

21 - Characterization of steel lined with multilayer micro/ nano‑polymeric composites (1443).

22 - Characterization and performance evaluation of Cu‑based/TiO2 nano composites (1443).

23 - Effect of ethanol on the mold filling-time and mechanical properties of woven glass fiber reinforced epoxy filled with TiO2 nanoparticles (1443).

24 - Fabrication of cost effective fiber metal laminates based on jute and glass fabrics for enhanced mechanical properties (1443).

25 - Effect of ultrasonic parameters on the mechanical properties of glass fiber reinforced polyester filled with nano-clay (1443).

26 - Can ultrasonic parameters affect the impact and water barrier properties of nano-clay filled glass fiber/polyester composites? (1443).

27 - Computational damage analysis of metal matrix composites to identify optimum particle characteristics in indentation process (1445).

28 - The Influence of Glass Fiber and Copper Wire z-Binder on the Mechanical Properties of 3D Woven Polymeric Composites (1445).

29 - Insights into particle dispersion and damage mechanisms in functionally graded metal matrix composites with random microstructure-based finite element model (1446).

30 - Assessing the crashworthiness of nanocarbon‐filled glass fiber reinforced epoxy composite tubes under axial loading (1446).

31 - Mechanical properties and corrosion protection performance of micro/nano alumina fillers coated steel (1445).

المجالات البحثية