Staff Data Search - جامعة الزقازيق

Personal Website

Marwa Ahmed Abdelbaky Salam

Faculty Engineering - Department Mechanical Design and Production Engineeering
NULL

Scientific degrees

BSc In NULL, [2000]
MSc In NULL, [2007]
PhD In NULL, [2013]

الحالة الوظيفية الحالية :

قائم بالعمل

Academic Jobs

معيد : 30/10/2000
Doctor Assisant : 17/12/2007
Doctor : 28/5/2013
Professor Assisant : 25/9/2018
Professor : 4/10/2023

Publications

1 - Monotonic properties of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid composites (2010).

2 - In-plane shear properties of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid and non-hybrid composites (2011).

3 - Interlaminar shear behavior of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid and non-hybrid composite laminates (2012).

4 - Flexural fatigue characteristics of two different types of glass fiber/epoxy polymeric composite laminates with statistical analysis (2012).

5 - Statistical analysis of monotonic mechanical properties for unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid and non-hybrid polymeric composites (2013).

6 - Experimental study on flexural fatigue behavior of glass fibers/epoxy hybrid composites with statistical analysis (2013).

7 - In-plane shear characteristics of unidirectional glass fiber/epoxy functionally graded (FG) and nonfunctionally graded (NFG) composite laminates with statistical analysis (2015).

8 - IZOD IMPACT CHARACTERISTICS OF GLASS FIBER/EPOXY FUNCTIONALLY AND NON-FUNCTIONALLY GRADED COMPOSITE LAMINATES WITH STATISTICAL ANALYSIS (2016).

9 - FLEXURAL FATIGUE BEHAVIOR OF UNIDIRECTIONAL GLASS FIBER/EPOXY COMPOSITES: NUMBER OF PLIES EFFECT (2016).

10 - Evaluation of Mechanical Properties of Jute/Glass/Carbon Fibers Reinforced Hybrid Composites (2017).

11 - Mechanical performance of intraply and inter-intraply hybrid composites based on e-glass and polypropylene unidirectional fibers (2017).

12 - Flexural Fatigue Performance of Glass Fiber/Epoxy Step-Wise Functionally and Non-Functionally Graded Composites of Different Structures (2017).

13 - An experimental investigation on the effect of incorporation of different nanofillers on the mechanical characterization of fiber metal laminate (2019).

14 - Improvement of Impact and Water Barrier Properties of GLARE by Incorporation of Different Types of Nanoparticles (2020).

15 - Experimental study on the improvement of mechanical properties of GLARE using nanofillers (2020).

16 - Abrasive Wear Performance of Jute–Glass–Carbon-Reinforced Composites: Effect of Stacking Sequence and Fibers Relative Amounts (2021).

17 - Mechanical Properties Evaluation of Sugarcane Bagasse-Glass/ Polyester Composites (2021).

18 - Advanced Fiber Metal Laminates Filled with Silicon Dioxide Nanoparticles with Enhanced Mechanical Properties (2021).

19 - Understanding the Effect of Halloysite Nanotubes Addition Upon the Mechanical Properties of Glass Fiber Aluminum Laminate (2021).

20 - Synthesis Effect of Nano-fillers on the Damage Resistance of GLARE (2021).

21 - The effect of incorporation of hybrid silica and cobalt ferrite nanofillers on the mechanical characteristics of glass fiber-reinforced polymeric composites (2021).

22 - Novel energy absorbent composites for crashworthiness applications (2022).

23 - Development of efficient energy absorption components for crashworthiness applications: An experimental study (2022).

24 - Effects of halloysite clay nanotubes on the energy absorption and failure mechanisms of glass/epoxy composite tubes subjected to quasi‐static axial crushing (2022).

25 - Metal/polymer composite cylinders for crash energy absorption applications (2022).

26 - Fabrication of cost effective fiber metal laminates based on jute and glass fabrics for enhanced mechanical properties (2022).

27 - Hybrid composite laminates reinforced with flax-basalt-glass woven fabrics for lightweight load bearing structures (2022).

28 - The influence of induced holes on crashworthy ability of glass reinforced epoxy square tubes (2022).

29 - Energy absorption characteristics of E-glass/epoxy over-wrapped aluminum pipes with induced holes: an experimental research (2022).

30 - Lightweight cost-effective hybrid materials for energy absorption applications (2022).

31 - Impact of montmorillonite clay on energy absorption capability of glass/epoxy composite tubes: An experimental study (2022).

32 - Crashworthiness performance of thin-walled glass/epoxy square tubes with circular cutouts: An experimental study (2022).

33 - Flax/basalt/E-glass fibers reinforced epoxy composites with enhanced mechanical properties (2022).

34 - Crashworthiness of Hybrid Pipes with Triggering Mechanism Under Quasi-static Axial Compression (2023).

35 - Fiber Metal Laminates Based on Natural/Synthesis Fiber Composite for Vehicles Industry: an Experimental Comparative Study (2023).

36 - Carbon‐glass reinforced epoxy hybrid composites for crashworthy structural applications (2023).

37 - Collapse behavior and energy absorbing characteristics of 3D-printed tubes with different infill pattern structures: an experimental study (2023).

38 - Lateral crashing response of thin‐walled composite structures filled with carbon nanopowder (2023).

39 - Effect of alumina nano‐particles on collapse behavior and energy absorption of laterally loaded glass/epoxy composite tubes (2023).

40 - Exploring the effect of nanoclay addition on energy absorption capability of laterally loaded glass/epoxy composite tubes (2023).

41 - Fabrication of Glass/Jute Hybrid Composite over Wrapped Aluminum Cylinders: An Advanced Material for Automotive Applications (2023).

42 - Particle-reinforced polymer matrix composites (PMC) fabricated by 3D printing (2023).

43 - Thermo‑mechanical characterization of electrospun polyurethane/carbon‑nanotubes nanofibers: a comparative study (2023).

44 - Lateral crashing response of thin‐walled composite structures filled with carbon nanopowder (2024).

45 - Exploring the effect of nanoclay addition on energy absorption capability of laterally loaded glass/epoxy composite tubes (2024).

46 - On the Influence of Different Infill Pattern Structures on the Crashworthiness Performance of 3D Printed Tubes Subjected to Lateral Loading Condition (2024).

47 - Assessing the crashworthiness of nanocarbon‐filled glass fiber reinforced epoxy composite tubes under axial loading (2024).

48 - Picking Up the Optimum Triggering Combinations of Crashworthy 3D-Printed Sustainable Structures: An Experimental Study in Al-Kharj Governorate, KSA (2024).

49 - Multi-objective optimization through desirability function analysis on the crashworthiness performance of thermoplastic/thermoset hybrid structures (2024).

50 - Axial Crashworthiness Characterization of Bio-Inspired 3D-Printed Gyroid Structure Tubes: Cutouts Effect (2024).

51 - Optimizing the crashworthy behaviors of hybrid composite structures through Taguchi approach (2024).

52 - Mechanical Characteristics of Sandwich Structures with 3D-Printed Bio-Inspired Gyroid Structure Core and Carbon Fiber-Reinforced Polymer Laminate Face-Sheet (2024).

53 - Hybrid Metal/Composite Structures Under Quasi-static Axial Compression Loads: A Comparative Study (2024).

54 - How Do Silicon Carbide Nanoparticles Affect the Crashworthiness Performance of Glass/Epoxy Composite Tubes? (2024).

55 - Crush analysis of hybrid glass/nano-silica/epoxy composite cylinders under lateral loading conditions (2024).

56 - Crashworthiness Characteristics of Bio-inspired 3D-Printed Tubes: A Lesson from the Environment (2024).

Research Area